6
Preparing for flight
Charging the quadcopter
Note:
In case that the quadcopter might descend to a further or insecure zone due to the low
battery power when flying in outdoor, the quadcopter is specially designed with the function
of secure warning. When the battery power is too low, the led light would turn from constant
on to flickering. Then the operator would have time to take back the quadcopter and change
the battery or recharge it for the next flight.
Take out the USB cable. Connect it with the battery’s charging port, and then connect the USB
cable with computer or compatible USB power adapter. It starts charging. While charging, the
charge indication light is red. The light turns off when charging is finished. Charging period is
about 80 minutes.)
1. If the battery is being charged by computer, make sure
to pull out the USB cable if you want to shut down the
computer.
2. When connecting the USB cable with the battery, make
sure to follow the correct polar indicator.
1.Open battery cover.
4. Turn on the switch on
the bottom of the
quadcopter.
5. Push the ON/OFF
power switch up.
2.Connect battery connector
with dash receiver
。
3. Enclose the battery into
battery case. Close the
battery cover.
6.Push the throttle lever to the
highest position,and the pull
back to the lowest position.
There will be one clear sound
from the transmitter,this shows
that the quadcopter has entered
into the pre-fly status.
