- 3 -
•
Is an air-dryer installed? (See the “A” and “B” blow.)
“A”
Cooling Dryer
+ Filter-Regulator
Pressure Gauge
“B”
Desiccant Dryer
+ Regulator Pressure
Gauge (A filter
included in COLDER)
Be sure to check if an air-dryer is installed on the air-tubing line and we recommend you to
use our desiccant type FILENCO DRYER/FILTER that will bring you ultra-low dew point. It
is easy to install and most economical.
•
Is not dust, oil or any other stuff solidified inside your COLDER?
1)
Do not fail to install a filter-separator on compressed-air line. If such stuff has clogged
up in the COLDER, purge it with air from discharging outlet of COLDER.
2)
When oil or grease is solidified inside, it can be washed out.
Troubles.
A COLDER has no working parts, which should bring you no trouble under normal operation.
But, if it gives you any trouble due to manufacturing imperfection, please send it back to us
without disassembling it. We will not be responsible when it is disassembled.
KAGER GmbH
Industrieprodukte
Paul-Ehrlich-Str. 10 A – D-63128 Dietzenbach
Tel. ++49-(0)6074-40093-0 – Fax ++49-(0)6074-40093-99
E-mail: [email protected] – Internet: www.kager.de
Air tubing to be with specified diameter and length.
Air Compressor
COLDER
I. D. of tubing
for Models 190/185:
3/8´´ min.
For Models 1607140:
1/4´´ min.