Kaffit X500 Manual Download Page 17

�. The installation location must be dry and protected against water spray

�. Some condensate, water, can always be discharged from a coffee  

 

machine

�. Do not use the coffee machine outdoors.

�. The machine has to be installed on a solid, level and heat-resistant base.

�. The surrounding temperature must be between �℃~��℃.

�. The mains connection must correspond with the voltage, amperage and  

  frequency indicated on the machine  label.

  Installation of wrong or improper electric plugs can cause short circuit    

  resulting in fire. The plug has to be selected and installed by qualified service  

  personnel only.

�. The X��� is electrically safe only when properly earthed as described in   

the current electrical safety specifications. Check for compliance and, when  

  in doubt, have the wiring thoroughly inspected by skilled personnel.

�. The manufacturer does not take any responsibility for any damage caused  

  by incorrect earthing or improper use of power supply .

�. No action needed from users to shift the product between �� and ��Hz,   

  product can adapt itself for both �� and �� Hz.

Tank water supply, tap water supply and barreled water supply are available 

for the X���. Tank water supply and tap water supply are the standard 

configurations when the factory setting has been finished. Default water 

supply is water  tank.

To guarantee the required water quality,a water filter system needs to be 

installed

� ‒ � dH GH
�� ‒ ��� ppm (mg/l) 
�‒� dH KH / ��‒��� ppm (mg/l) 
�.�‒�.� pH 
< �� mg/l 
�� ‒ ��� ppm (mg/l) 
��‒��� μS/cm (microsiemens) 
< �.� mg/l 

Total hardness:
 
Carbonate hardness
Acid content/pH value
Chlorine content
TDS
electric conductivity
Iron content

�.�  Installation location

�.�  Electrical connection

�.� Water supply connection

�.�.�   Water quality

13

Model X500

Summary of Contents for X500




































































Reviews: