Lane Departure Warning
The lane departure warning can be ordered has been available:
• Since 03/07 in the
– E60
– E61 and
• Since 09/07 in the
– E63
– E64
In the event of a replacement of components, the different features of the variants as
described in the parts catalogue, and the instructions for the necessary coding and cali-
bration routines stored in the diagnostics and programming system must be observed.
You will also find information on the lane departure warning in the “E60/E61 Lane depar-
ture warning” training Information.
High-beam Assistant
The high beam assistant was introduced for the first time in the E60, E61, E63 LCI, E64
LCI BMW models from 2007 Model Year.
The high-beam assistant is not available separately for the F01/F02 and is part of the
ZDA Driver Assistance Package option.
Low-sensitivity Mode
A low-sensitivity mode has been implemented in order to comply with the US statutory
requirements. In this mode, the sensors are less sensitive.
To activate this mode, the driver must press the turn signal stalk on the steering column
forwards for 10 seconds with the vehicle stationary, the lights switched off and terminal
15 ON.
As soon as the high-beam assistant is activated, the driver receives a Check Control
message indicating that low-sensitivity mode is active.
The high-beam assistant reverts to its basic state following a power cycle.
Service Information
30
F01 KAFAS
