Operating Manual
| Cable And Network Analyzer System (iOS Version)
42
1.22.7 Editing Reports
Existing reports can be edited, it is possible to change the trace view, markers, tags, site, operator details in reports. If
a report is in memory (in report view) it can be edited directly, existing reports can be merged with the current report in
memory and the merged report edited. If you only want to edit an existing report, save any unsaved data you want to keep
1.22.1.2 can be used to clear the report in memory if needed. Site, Operator, Location and Comments can be edited
directly as in Section 1.22.1 . Individual Plots can be edited by touching on the individual plot to expand its view, at this
level individual plot comments and tags can be edited or added in the same way as new reports.
Figure 35 Plot expanded view (Reports)
1.22.7.1 Edit Plot
Pressing the Edit Plot label allows you to edit/add the Plot Markers, View Scale and visibility of the trace and markers.
When you are satisfied with your edits save the plot to return to the previous menu or preview to check your progress
before saving. See Figure 36 . Marker editing or addition is the same functionality as in Section 1.19.2.1 , for Trace
1.22.7.2 Back
Returns to the previous screen.