©2012 Kaelus, Inc. All rights reserved
.
ACU0001F1V1-1 User Guide
43
To execute a command to make changes to data, follow the steps below.
1.
Enter the number corresponding to a command first.
2.
If a data value is expected for a command then enter the data value
associated with that command. Leave it blank to keep the original value.
3.
Reboot the system when making changes to settings such as the IP to
apply the changes.
To display information on a command, enter the corresponding number.
6.3
V iewing System Information
The following table describes commands that are used to display
information.
No. Command
Description
1
Show Product Information
Displays the product model and serial number of
the ACU controller
2
Show OS Information
Displays the OS version and memory, etc.
3
Show Network Configuration Displays the IP address of the ACU controller,
the Gateway IP, Subnet mask, FTP server IP and
SNMP Server IP
4
Show System Information
Displays the hardware and software version of
the ACU controller
5
Show System Date & Time
Displays the current system UTC date and time
6
Show Current Power Setting Displays the on/off status of AISG 12V and 24V
DC
9
Help
For an explanation on how to use a command to
make changes.
