25
1 7 10 9
Setting –
Advanced Setting Menu
–
MODBUS RTU Settings
1 7 10 9
Setting –
Advanced Setting Menu
–
MODBUS RTU Settings –
Data Write Protection
1
This is the section which is used to give writing allowance to the
device parameters when connection is made externally via MODBUS
RTU.
The required condition is selected for function by using
up or down keys. “Select”
key is pressed to take them
into the memory. “Save changes?” message will appear
on the screen. Pressing “OK” key, the value is taken into
the memory.
2 3
5 6
8 9
11 12
7
4
1
10
30
Apply
▲ +
▼ -
Disable
Data writing protection
1 7 10 9
Setting –
Advanced Setting Menu
–
MODBUS RTU Settings –
Data Read Protection
2
This is the section which is used to give reading allowance to the device
parameters and data when connection is made externally via MODBUS
RTU.
The required condition is selected for function by using
up or down keys. “Select”
key is pressed to take them
into the memory. “Save changes?” message will appear
on the screen. Pressing “OK” key, the value is taken into
the memory.
2 3
5 6
8 9
11 12
7
4
1
10
30
Apply
▲ +
▼ -
Disable
Data reading protection
1 7 10 9
Setting –
Advanced Setting Menu
–
MODBUS RTU Settings –
Data Write Password
3
30
Data writing password
0000
Apply
▲ +
▼ -
◄
2 3
5 6
8 9
11
7
4
1
10
12
The password should be entered to write data. This is the section in
which the password is entered. The value is setup to the required
value by using the up and down key starting from the digit where the
blue line is. Then left key is pressed and the blue underline moves
next to the left digit. All values are entered in the same way by using
up and downkeys. “Select”
key is pressed to take them into the
memory. “Save changes?” message will appear on the screen.
Pressing “Okay” key, the value is taken into the memory.
P.S.: The security increases when giving different passwords for
writing and reading data.
1 7 10 9
Setting –
Advanced Setting Menu
–
MODBUS RTU Settings –
Data Read Password
4
30
Data reading password
0000
Apply
▲ +
▼ -
◄
The password should be entered to read data. This is the section in
which the password is entered. The value is setup to the required
value by using the up and down key starting from the digit where the
blue line is. Then left key is pressed and the blue underline moves
next to the left digit. All values are entered in the same way by using
up and downkeys. “Select”
key is pressed to take them into the
memory. “Save changes?” message will appear on the screen.
Pressing “Okay” key, the value is taken into the memory.
P.S.: The security increases when giving different passwords for
writing and reading data.
2 3
5 6
8 9
11
7
4
1
10
12
1 7 10 8
Setting –
Advanced Setting Menu
–
Generator Parameters
VARkombi-12-PC-TFT-OG does not have this function.
