Kaden KSI Series, Manual

Page: 12 / 16

12 | Kaden Remote Controller Manual
6. How to use the
advanced functions
NOTE: This function is only available under COOL mode.
ECO operation
When the ECO feature is activated, the air conditioner will
operate automatically at 24ºC.
The fan speed is Auto.
NOTE: Pressing the ON/OFF button, modifying the mode
or adjusting the set temperature to less than 24ºC will
stop
ECO operation.
Under ECO operation, the set temperature should be 24ºC
or higher. It may result in insufficient cooling if you feel
unconformable, just adjust the temperature to stop it.
NOTE: The SLEEP function is not available in FAN or
DRY mode.
SLEEP function
The SLEEP function is used to decrease energy use while
you sleep (and don’t need the same temperature settings
to stay comfortable). This function can only be activated
via remote control. For detail, see “sleep operation” in
OWNER’S MANUAL.
TURBO function
The TURBO function makes the unit work extra hard to
reach your present temperature in the shortest amount
of time possible.
• When you select TURBO feature in COOL/HEAT mode,
the unit will blow cool/hot air with strongest wind setting
to jump-start the cooling/heating process.
ACTIVE CLEAN function
• The Active clean technology washes away dust, mould,
and grease that may cause odours when it adheres to
the heat exchanger by automatically freezing and then
rapidly thawing the frost. A “pi-pi” sound will be heard.
The
ACTIVE CLEAN operation is used to produce more
condensed water to improve the cleaning effect, and the
cold air will blow out. After cleaning, the internal wind
wheel then keeps operating with hot air to blow-dry the
evaporator, thus preventing the growth of mould and
keeping the inside clean.
• When this function is turned on, the indoor unit display
window appears “CL”, after 20 to 45 minutes, the unit
will turn off automatically and cancel
ACTIVE CLEAN function.
NOTE: You can only activate this function in COOL or
DRY mode.
ECO function
ECO/GEAR function (some units)
Press X-ECO button to enter the energy efficient mode in a sequence of following:
ECO
➞
GEAR (75%)
➞
GEAR (50%)
➞
Previous setting mode
➞
ECO...
Note: This function is only available under COOL mode.