5
the Wine Chiller is running for a few hours everything will be back to normal.
Interior Light
You can turn the interior light ON or OFF by pushing the button marked with the “bulb” symbol
.
Door Lock(For KA110WR & KSJ168EW)
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock and
turn it counterclockwise to unlock the door. To lock the door do the reverse operation making sure metal
pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
CARE AND MAINTENANCE
How to remove the shelf
To prevent damaging the door gasket, make sure to have the door all the way opened when pulling the
bottom shelf out of the rail compartment.
For easy access to the storage content, you must pull the shelf approximately 1/2 out of the rail
compartment, however this unit was designed with a post on each sides of the shelf track to prevent
bottles from falling.
When removing the shelf out of the inner rail, make sure to remove all items first. Then move the
shelf to the position where the notch of shelf is exactly under the post and lift the shelf. In order to
replace the shelf, repeat steps described above in reverse.
Replacing Your LED Light
You must cut off electrical power avoid tip-and-run hurt.
Please remove the top two shelves.
(Attention please: LED light is covered by top electrical box.)
Please take out the lock screw by “+” type head screwdriver first (Fig. A)
Please pull out Housing 4 from 6 of LED light board. (Fig. B)
Please take out 2pcs of screw 5 by Philips screwdriver. (Fig. C)
Please pull out LED light board 6 from light cover. (Fig. D)
Please replace new LED light according above method.
