11
To view the “set” temperature. (anytime) press and hold the corresponding button for approximately 5
seconds, the “set” temperature will temporarily “flash” in the LED display for 5 seconds.
Note
: During periods of high humidity, some condensation may appear on outside surfaces of cooling
appliances. This condensation will disappear when humidity levels drop. For prevention it is advisable to install
the appliance with sufficient ventilation in a dry and/or an air-conditioned room. Please ensure that doors are
closing and sealing properly.
For KA143T
:
The controls of your Wine chiller (the upper zone and middle zone)
Set Upper
Set Middle
℃
℃
RUN
Light
Power
Upper Chamber
Middle Chamber
RUN
Indicator light illuminates to signify the cooling mode is currently in operation.
Light
To control the inner light turn on/off.
In order to reduce energy consumption, this wine chiller will automatically switch off the LED lights after
10 minutes. If you want the LED light to remain on continuously, this is possible. Please press and hold
the "LIGHT" button for 5 seconds, the display will show "LP". After 4 seconds, the display will revert back
to normal and the light will remain on until manually switched off.
If you want to revert back and conserve energy (recommended), please press and hold the "LIGHT"
button for 5 second, the display will show "LF". After 4 seconds, the display will revert back to normal,
and the light will automatically switch off after 10 minutes
Power
To control this
appliance turn on/off.
“Set Upper” Button
To set the temperature of the upper chamber.
“Set Middle” Button
To set the temperature of the middle chamber.
“Up Chamber”
To shows the temperature of the up chamber.
“Middle Chamber”
To shows the temperature of the middle chamber.
Setting the Temperature Control
Each cooling compartment of the wine chiller (upper & lower) is independently controlled. To set the
temperature:
Connect the power cord to a properly grounded outlet.
Set the desired cooling temperature by pressing the buttons adjacent to the
“Set Upper/Set Middle”
program. Each depression of the buttons will scroll through the available temperature settings (for each
compartment) in increments of 1 degree. The temperature selected will flash in the LED display for
approximately 5 seconds, then revert back to display the temperature of the internal chiller
Upper compartment
: The temperature setting can be adjusted from 5
°C to 18°C.
Middle compartment:
The temperature setting can be adjusted from 5
°C to 10°C.
