KADAK KwikNet MPC5200, User Manual

Page: 11 / 28

KwikNet MPC5200 FEC Device Driver
KADAK
5
5. Making the
KwikNet
MPC5200 BestComm Library
The make process depends upon the structure of the
KwikNet
MPC5200 FEC Ethernet
Device Driver installation directory
KN5200E
. When the driver is installed, the following
subdirectories are created within directory
KN5200E
.
ERR
Construction error summary
M5200E
Driver source and header files
M5200BC
BestComm API and microcode source and header files
MAKE
Construction make directory
TOOLXXX
Toolset specific files
TOOLXXX\LIB
Toolset specific library will be built here
Several toolset specific directories
TOOLXXX
will be present. There will be one such
directory for each of the software development toolsets with which KADAK has built the
KwikNet
MPC5200 BestComm Library. Each toolset vendor is identified by a unique two
or three character mnemonic,
XXX
. The mnemonic
UU
identifies the toolset vendor used
with the
KwikNet
Porting Kit.
Directory Toolset Vendor
KwikNet
Part
TOOLDA DA
Diab (Wind River)
KwikNet
PPC
32
TOOLME ME
Metrowerks
KwikNet
PPC
32
TOOLMW MW
MetaWare
KwikNet
PPC
32
TOOLUU UU
Custom tools
KwikNet
Porting Kit
Within directory
TOOLXXX
you will find a tailoring file named
KNZZZCC.INC
used to
tailor the
KwikNet
Library construction process for the Microsoft make utility. This file is
a copy of the most recent tailoring file for toolset
XXX
provided with
KwikNet
PPC
32
. For
toolset
UU
, the file is a copy of the most recent Metrowerks tailoring file provided with
the
KwikNet
Porting Kit.
Within directory
TOOLXXX
you will find an additional tailoring file named
KN5200E.INC
used to tailor the library construction process specifically for the generation of the
KwikNet
MPC5200 BestComm Library. It is this file which contains the implicit rules for
compiling source files and creating the library module.
Getting Ready
Before you start, build your
KwikNet
Library as described in Chapter 3.2 of the
KwikNet
TCP/IP Stack User's Guide. Once you have completed this step, all necessary
KwikNet
header files will be present in your Treck installation directory, say
C:\TRECK\INCLUDE
.
If you are using
KwikNet
PPC
32
, make sure that your tailoring file
KNZZZCC.INC
from
KwikNet
installation directory
KNT383\TOOLXXX
matches the copy in driver directory
KN5200E\TOOLXXX
.
If you are using the
KwikNet
Porting Kit, copy your toolset specific tailoring file
KNZZZCC.INC
from
KwikNet
Porting Kit working directory
KNT713\TOOLUU
to driver
directory
KN5200E\TOOLUU
. Then edit tailoring file
KN5200E\TOOLUU\KN5200E.INC
to
use the compilation and librarian commands for your specific software development
tools.