Operation
Operating manual Powador-piccoLOG_EN
Page 21
7.3
Power control
There is a button in the connection area of the logger to turn the Power Control
function on or off.
NOTE
When Power Control is activated configuration of the device is
limited and a device scan is not possible.
1
Figure 8: Flick Power Control switch
Activate Power Control
1. Open protective cover.
2. Turn Power Control switch left to the "
ON
" position.
3. Close protective cover.
Deactivate Power Control
1. Open protective cover.
2. Turn Power Control switch right to the "
OFF
" position.
3. Close protective cover.
NOTE
When Power Control is deactivated an automatic and manual
inverter scan can be performed.
