ð
Final outcome
1.4
Identification
You will find the name plate with the following data for service and other require-
ments specific to installation on the right side panel of the product:
– Product name
– Part no.
– Serial no.
– Date of manufacture
– Technical data
– Disposal information
– Certification marking, CE marking.
KACO new energy
Werner-von-Siemens-Allee 1
74172 Neckarsulm
Made in Germany
KACO blueplanet 125 TL3 M1 WM OD IIP0
Part number
1001623
Serial number
125TL01654321
Year Q1 / 22
Input
Vmax PV / lsc PV (max) / Inom PV
1500 V / 300 A / 160 A
V-MPP at Pnom / V- range
875V - 1300V / 875V - 1450V
Output
Nominal voltage
600 V (3P+PE)
Voltage range continuous operation
480 V - 760 V (Ph-Ph)
Current (maximum continuous)
3 x 132,3 A
Frequency range
45 Hz - 65 Hz
Output
Power
Snom at 600 V Unom
125 000 VA
Smax at 600 V Unom
137 500 VA
Reactive power
cos phi
0,3-1 ind/cap
Environ-
ment
Temperature range
- 25...+60°C / -13...+140 °F
Protection class / Ingress protection
I / IP66 / NEMA 4X
ARC fault circuit protection
none
Interface protection according to country specific requirements, details see manual
Grid Support Interactive Inverter
Max. Backfeed Current
0 A
Conf. to UL 1741 & UL 62109-1
Cert. to CSA C22.2 No. 107.1 &
CAN/CSA Std. C22.2 No. 62019-1
CAN/CSA Std. C22.2 No. 62109-2
No galvanic separation / Ungrounded Arrays Only
Fig. 1:
Name plate
1.5
Warnings on the device
A warning sticker is affixed to the device. Read the warnings carefully.
Do not remove the sticker. If the sticker is missing or is illegible, please contact a
KACO representative or distributor.
– Article number: 3013153
Fig. 2:
Warning sticker
1.6
Target group
All activities described in the document may only be carried out by specially trained personnel with the follow-
ing qualifications:
– Knowledge about how an inverter functions and operates
– Knowledge of the modbus specifications
– Knowledge of the SunSpec modbus specifications
– Training in the handling of hazards and risks during the installation and operation of electrical units and
plants.
– Education concerning the installation and start-up of electrical units and plants.
– Knowledge of applicable standards and directives.
– Knowledge and adherence to this document with all safety notices.
1 | General information
Manual
KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
Page 6
EN-US
