st
ep 2
IR Control Switch with cable 12VDC
installation options
to drill into a panel:
sensor settings:
to attach under shelf or cabinet:
motion sensor function
light sensor function
To switch functions,
press the bottom for
a short time
Double sided
adhesive tape
If you want to insert the IR switch into a panel,
connect the additional plastic piece to the flat
section to make a round cylinder. Drill a hole as
per below illustration.
NOTE:
We only recommend inserting IR Switch
into a panel if the panel thickness is greater
than 20mm
1. The light goes on when moving the
hand over the sensor less then 1sec
2. The light goes off when moving the
hand over the sensor once again for
less than 1sec
To Dim:
Hold the finger in the switch
for 3 sec or until the lamp dims.
1. The light goes on when the door is opened
2. The light goes off when the door is closed
Place the sticker onto the flat section of the IR
switch to stick it to a shelf or overhead cabinet.
We offer a dedicated customer service line
for advice or any questions you may have
on kaboodle products.
Call customer service on:
Australia:
1800 666 078
Monday to Friday
between 8.00am and 6.00pm AEST
New Zealand:
0800 522 663
Monday to Friday
between 8.00am and 5.00pm NZST or email:
step 1
step 2
step 3
step 4
Next, follow the
instructions to fit
your doors and
panels.
Finish off your
Kaboodle Kitchen
by installing your
benchtop.
You’ve finished
adding your
parts and
accessories.
Your Kaboodle
cabinet is now
complete.
Caring for your kaboodle parts and accessories
Looking after your cabinets is really easy and with the right care and maintenance they
will last you for many years. Just follow these simple steps and if you need any more
information you can contact us on
1800 666 078
Monday to Friday between 8:00am
and 6:00pm AEST or email:
.
Hinges, runners and other parts and accessories should be kept dry at all times.
To keep the mechanisms performing at their best, regularly wipe them with a dry cloth
removing any dust and grime that may build up.
p.
2
Ver. 1
W-50563
14
.5
mm
