har
dw
ar
e k
e
y
A
A
A
C
B
st
ep 2
p.
2
Ver. 9
W-50541
1.
attaching the L-Irons
attaching the L-bracket and frame
Remove two flat head screws from each L-Iron (A) and attach
to the runners (B) as pictured above.
NOTE:
You will need to slide
the runner forward (i) and backward (ii) to access the round holes
of the runners. Be sure to screw through the runner to the L-Iron
as above.
(i)
Remove 2 screws from the back of the frame at the top,
insert the L-Bracket and fix into place with the 2 screws
as pictured above (i).
NOTE:
It is not necessary to fully
tighten the screws at this stage as they will be adjusted
at a later stage.
(ii)
Remove the top 2 screws on each L-Iron and attach to the
frame. Be sure to screws through the frame to the L-Iron
as pictured above (ii).
Mark out and pre-drill four holes on the bottom panty panel
as per the diagram above. Use a 2mm drill bit to pre-drill
holes to a depth of 2.5mm.
Mark out and pre-drill four holes on the top panty panel as
per the diagram above. Use a 2mm drill bit to pre-drill holes
to a depth of 2.5mm.
For left hand open, simply mirror the measurements above.
right open
shown
back
front
220mm
152mm
152mm
488mm
488mm
478mm
170mm
428mm
30
.5mm
62mm
62mm
L-Bracket
runners pair
L-Irons
pre-drilling holes (top)
pre-drilling holes (bottom)
4.
3.
(i)
(ii)
(ii)
2.
A
B
C
top pantry panel
bott
om pantry panel
right open shown
back view
450mm
pantry pullout baskets 6 tier
(i)