Kabola ECOLINE KB Series, User Manual

Page: 7 / 29

Instruction manual Kabola KB- Hybrid -Series version 1, 2022
7
No.1 Dashboard and burner plug.
230 Vac 360 Watt
No.2 Feeding Electric element 3000Watt
230 Vac 16 Ah. Landline or generator
4 Installing and preparing for first use
In this chapter you will find directions and hints for a correct placement and fitting of the boiler and
accompanying parts.
Warning:
Do not store any flammable or gaseous substances in the room where the
boiler installed. This is to ensure that no explosions or fires can occur.
4.1 Installation
4.1.1 Fitting the boiler
➢
Install the boiler in a dry place.
➢
Install the boiler on a firm horizontal base.
➢
Make sure there is sufficient supply of fresh air in the room where the boiler is installed (see hint
below).
➢
To avoid movement secure the base of the boiler by using the holes with M5 threat in the feet from
the boiler (figure 1)
➢
Keep a minimum distance of 250 mm behind the boiler for the flue-gas outlet
➢
Use an earthed plug socket for connecting the 230 Volt AC versions to the power supply.
➢
For a 230 Volt version, ensure a grounded wall socket to connect the boiler. The normal thin plug
feeds the burner and the dashboard (360Watt).
➢
The second thick plug feeds the 230Volt electric element and must be secured at 16Ah and should
only get its power directly from the generator or shore power. This is to ensure that the batteries of
the means of transport cannot be taxed too heavily.
Hint:
As a rule of thumb for the ventilation openings, take 2,5 times the diameter
of the flue gas outlet.