6.
KABI Electronic Preset Meter Oil Control Gun
AUTO DISPENSING OPERATION AND STEPS
1. Choose the auto mode by pressing STOP/KEY for 3 to 5 seconds.
2. Increase or decrease the presetting amount by pressing
e.g. 5.0 L.
3. Press RESET to reset the TRIP counter to zero. Press the trigger. Release the
trigger when you feel it is dispensing. The gun is now dispensing and counting
quantity.
4. To stop the dispensing during the operation, press the button STOP/KEY or press
the trigger. The dispensed amount will be shown on the LCD display, e.g. 3.28 L.
Press the trigger again and the gun will continue to deliver.
5. When the preset amount has been reached, the dispensing will stop
automatically. There is an OK signal shown on the display.
6. After preset dispensing, push the button to release the pressure of nozzle.
MANUAL DISPENSING OPERATION AND STEPS
1. Choose the manual mode by pressing STOP/KEY for 3 to 5 seconds.
2. Press RESET to reset the TRIP counter to zero. Press the trigger and the gun will
start dispensing and counting the amount being dispensed.
3. The accuracy will not be affected by start or stop dispensing from time to time,
e.g. 8 L as dispensing quantity for one time.
