2020
0434.000.01.01.01
18
Adjusting the roller cages
► Loosen the star grip for the vertical guide roller.
► Adjust the vertical guide roller to the material.
► Tighten the star grip.
► Loosen the star grip for the horizontal guide roller.
► Adjust the horizontal guide roller to the material.
► Tighten the star grip for the horizontal guide roller.
✓
The roller cages have been adjusted.
Info
ATTENTION!
On the length measuring device’s intake side, the horizontal guide roller must be ad-
justed to the direction of the material feed and the properties of the material.
That means:
If the material is fed from above, the position of the horizontal guide roller is above on
the intake side, and the material is guided under the guide roller to the length measur-
ing device.
If the material is fed from below, the position of the horizontal guide roller is below on
the intake side, and the material is guided over the guide roller to the length measur-
ing device.
Info
ATTENTION!
Always pull the material through the length measuring device in a straight line, be-
cause otherwise contact to the measuring wheel will be broken, which can cause inac-
curate measurement results.
