- MEM.KEYS NUMBER -
If you don’t have
PIN CODE you don’t
codify any key
The
PIN CODE
is required to use this function.
- press
ESC
to quit
- press
ENTER
to continue
The display will show:
- DATES INSERTION -
PIN CODE : XXXX
PIN
: XXXX
- Enter
the
PIN CODE
- press
ESC
to quit;
- press
ENTER
to continue.
The display will show:
CONNECTING ...
# # # # # # # # #
#
At the end of the operation the display will show:
Keys number in
memory:
Y
Press any key...
-
Press a key to quit.
NOTE:
this function can be used to start the car with an
emergency start.
Enter the PIN CODE
and read the number of keys, at the end of the operation the car can be started once, excluding
the immobilizer function (using a key without transponder or with disabled transponder).
If a wrong PIN has been entered or there are errors during communication, the display will
show:
error message No. 1
(see Operating Manual chap. 10 – WARNING/ERROR
MESSAGES).
1.4
READING
IMMO
ID
This function is used to view the
immobilizer identification (ID IMMO
), a code comprising 14
alphanumerical characters, essential for finding the
PIN CODE;
In such cases the
PIN CODE
is
issued by the car manufacturer.
9
