13
Confidant RFID Kit 2 & Kit 3 Installation Guide - PK3649_T_04_16
7- INSTALL LOCK ON DOOR
- Back Plate Mount
(Key Override)
7- INSTALL LOCK ON DOOR
- Rose Mount
(Key Override)
*
C
Screw M5
(5mm)
Screw M5
(5mm)
Screw M4
(4mm)
A
B
A
B
A
*
*
C
D
D
IMPORTANT
See Annex A for
Exterior Applications
See Annex A for
Exterior Applications
3mm to 13mm
3mm to 13mm
• A, B, C and D required
for security grade
• A always required
• C recommended
IMPORTANT:
After connecting
all cables, make sure all excess
cables are pushed inside the
hole(s) in the door.
IMPORTANT:
After
connecting all cables,
make sure all excess
cables are pushed
inside the hole(s) in
the door.
For Kit 3 lock certified EN 179 with BMH 801 lock case, please refer
to the following before installing the lock:
- Installation and maintenace manual for BMH-panic door locks
- Instructions for the use of BMH locks and hinges
For Kit 3 lock certified EN 179 with BMH 801 lock case, please refer
to the following before installing the lock:
- Installation and maintenace manual for BMH-panic door locks
- Instructions for the use of BMH locks and hinges
*
*
Post may be
attached to lock
To tighten set
screw for DIN
certified locks
IMPORTANT:
For DIN lock
install this plate
IMPORTANT:
For DIN lock
install this plate
To tighten set
screw for DIN
certified locks
*
Post may be
attached to lock