Installation
Installation Manual
32
k2evo702 - 201610
Kaba c-lever and variants
4.5.2
c-lever ES1 variant
Requirement:
•
Outside shield installed
•
Centring sleeve positioned in outside shield
•
Mortise lock and lock cylinder installed
Procedure:
1.
Note: do not trap the antenna cable.
Place the internal fitting (26) with the inside lever
handle on the spindle and lock cylinder.
35
24
26
36
24
2.
Screw in the top fixing screw (24) with a pull protec-
tion washer (35).
3.
Screw in the middle fixing screw (24).
4.
Screw in the bottom fixing screw (24) with a pull pro-
tection washer (36).
5.
Note: tightening torque max. 2.5 ± 0.5 Nm.
Secure the internal fitting and outside shield using
three fixing screws (24).
6.
Insert the antenna cable plug into the socket (59) of
the e-module for the internal fitting.
59
7.
Insert batteries if necessary.
8.
If batteries are already inserted, remove the contact
protection film.
9.
batteries.
