background image

About this document

Technical Manual

6

04045088 - 11/2016

Kaba wireless gateway 90 40

1.5

Abbreviations/Definition of terms

In order to make it easier to read the document, the following brief descriptions have
been used:

Product designation

Short designation

Kaba wireless gateway 90 40

wireless gateway

Kaba digital cylinder, wireless option
Kaba c-lever, wireless option

wireless component

1.6

Warnings

Warnings with information, instructions and forbidden actions to prevent personal
injury and material damage are highlighted.

Please note the warnings! These are intended to help avoid accidents and prevent
damage.

1.6.1

Hazard categories

Warnings are divided into the following categories:

CAUTION

Low risk

Indicates a potentially dangerous situation that can lead to minor injury.

NOTICE

Important information about the correct use of the product.

Non-adherence to the notes can lead to malfunctions. The product or something in
its vicinity could be damaged.

1.6.2

Symbols

Depending on the hazard source, the following symbols are used for warnings.

General hazard

Danger of damage to electronic
components from electrostatic
discharge

1.7

Information

Information is designated by an info symbol.

Tips for usage, useful information.
These help to make the best use of the product and its functions.

Summary of Contents for 90 40









































Reviews: