Battery Maintenance
The battery must be maintained for both Battery powered locks and Battery
Assist locks.
REPLACE BATTERY
1.
Enter a valid combination and open the lock.
Note:
For a Battery powered lock if the existing battery will not provide enough power
for you to open the lock, hold a fresh 9 Volt Alkaline Battery to the lock with the
contacts touching the metal trim encircling the red and green LEDs. The “+”
(positive) battery terminal should cover the red LED. Enter a valid combination and
open the lock while holding the battery in place.
2.
Locate the battery clip mounted inside the door near the lock.
3.
Note how the battery and the cable are positioned in the clip then remove the
battery and battery cable from the battery clip.
5.
Unsnap the connector from the old battery and reconnect a fresh 9 Volt Alkaline
battery to the battery connector.
6.
Insert the new battery and cable into the battery clip.
7.
Test operation of the lock prior to closing the container.
Summary of Contents for 52
Page 7: ...NOTES ...
