2
Figure 1 - Door Handing
Door Handing
Determine whether the door is left hand reverse (LHR) or right hand reverse (RHR) by referring to Figure 1.
Note:
Installer must insure that the door meets all building, fire and security code requirements prior to
installing the High Security Pedestrian Exit Device.
Ensure that the Exit Device you are installing is compatible with the handing (LHR or RHR) of the door.
Templates
Rim Exit Device
A template is provided for the appropriate door installation (LHR or RHR) to assist in (1) laying out hole
locations for mounting the Rim Exit Device, (2) locating the lock horizontal centerline, and (3) locating the
lock strike top and bottom mounting hole centerlines. Ensure that the template is the correct one for the
handing of the door.
CDX-09 Lock Assembly
A separate template is included to assist in laying out the hole locations for the CDX-09 lock assembly. This
template is positioned on the inside of the door as described in the “CDX-09 Lock Assembly Template”
section.
Dial Ring Mounting Template
An additional template is provided as an aid for locating, drilling, and tapping the dial ring mounting screw
holes relative to the spindle hole. This template is positioned on the outside of the door as described in the
“CDX-09 Dial Ring Mounting Template” section.
