depending on the charging current. The light on the side indicates the status of the
recharge. When the light is on, it is recharging, when the light switches off, the
lighter is fully recharged. When the lighter is low on battery the light flashes. Before
use, charge the battery fully, thus ensuring the long life of the battery.
Do not
charge with quick rechargers.
BATTERY
KAARI LOIMU X2
™ plasma lighter has rechargeabl
e high-quality UN 38.3 certified
300mAh Lithium-Ionpolymer battery. Input: DC 5V, 2.4A Output: DC 6000V-7000V
MAINTENANCE
Clean the Pins lightly with soft cloth occasionally, or when they get dirty.
The surface of the lighter (Paint/coating) will wear off in use and it is completely
normal. Do not expose the lighter to chemicals and or high temperatures since it
further speeds up the wear off paint/coating. Use professional cleaning equipment
when cleaning the lighter.
Keep the seals clean from dirt and debris.
It is advisable to recharge the lighter every 6 months to make sure the battery lasts
longer.
MISUSE
DO NOT sink KAARI LOIMU X2
™ plasma lighter to water or any liquids
when the
protective cover is open
. It causes short circuit and won’t work anym
ore.
DO NOT use plasma lighter with wet hands or expose it to moisture
DO NOT expose lighter to high, over 50-degrees (Celsius) temperatures
DO NOT keep the lighter on unnecessary long times. It will shorten the lighters work
life
DO NOT touch the plasma arc or point it towards people or animals. Plasma arc is
very hot (~1100 degrees Celsius). Touching the plasma arc might cause severe burns
DO NOT dismantle or modify the lighter or it’s parts
Summary of Contents for LOIMU X2 Series
Page 1: ......
