Page 4
// Button1/ Button2/ Button3/ Button4
Branch1 // Passive/ Manual K9System Activation
*
User
Branch2 // 95f/ 90f/ 100f/ Hot Alert Temperature
*
User
Branch3 // Horn/ Siren/ Both Temperature Alert Warning
User
Branch4 // 15min/ 5min/ 10min/ Disable Remote Temperature Poll User
Branch5 // 5Min/ 7Min/ 10Min Alert Delay Timer
User
Branch6 // Enable/Disable K9SystemAutoOn Pin S4
Tech
Branch7 // TemperatureAutoStart/ EasyIdle Engine Controller
User
Branch8 // 75f/ 80f/ 85f Hot Start Temperature
*
User
Branch9 // No Selection
Branch10 // Door Pop/ Trunk Pop Output Selection Pin M1
Tech
Branch11 // 5deg/ 10deg/ 2deg Hot Start Hysteresis.
User
Branch12 // External Pop receiver/ Sensor Input Pin 2
Tech
Branch13 // Disable/ Enable Remote Feature Lockout
Tech
Branch14 // Enable/ Disable Disarm before PinM1
Tech
Branch15 // Disable/ Enable Rearm after PinM1
User
Branch16 // FactoryAlarmDisarm/ Ignition Output Pin M10
Tech
Branch17 // Pulse/ Timed/ Latched/ HotStart Aux1 Output Pin A7
Tech
Branch18 // Pulse/ Timed/ Latched/ Hot Alert Aux2 Output Pin A6
Tech
Branch19 // Manual/ Passive Alarm Arming
User
Branch20 // Disable/ Enable Auto Alarm Rearm
User
Branch21 // Siren/ Both/ Silent Arming Chirps
*
User
Branch22 // No Selection
Branch23 // Single/ Double Door Unlock Pulse
Tech
Branch24 // 1 Second/ 3 Seconds Door Lock Pulse Length
Tech
Branch25 // Disable/ Enabled Passive Door Locking
Tech
Branch26 // Disable/ Enable Lock After Start
Tech
Branch27 // Disable/ Enable Lock After Shutdown
Tech
Branch28 // Normal/ Extended/ SuperExtended Smart Start Crank Time Tech
Branch29 // Enable/ Disable Smart Start Temperature Compensation Tech
Branch30 // SmartStart/ Tach Engine Sense Mode
Tech
Branch31 // RPMLearnTach/ GasEngine/ DieselEngine Program Engine Tech
Branch32 // Acc/ Ignition Pin i3 Output Type
Tech
Branch33 // Negative/ Positive Wait to Start Input Type
Tech
Branch34 // Enable/ Disable Turbo Timer
Tech
Branch35 // Enable/ Disable Open Door Report
Tech
*Asterisk denotes that the feature can be changed on the remote menu
User denotes that the feature can be changed by the user.
Programmable Branches/Features