• = Default Factory Setting
DIP SWITCH # 3: Last Door Arming & Locking:
- Configures the alarm to automatically arm itself & lock the vehicle doors (if
vehicle is properly equipped), 30 seconds after the last door is closed with the
vehicle’s ignition “Off”.
•Dip switch “On” = Last door arming “On”
Dip switch Off = Last door arming “Off”
DIP SWITCH # 4: Auto-Rearm:
- Allows the Alarm to Rearm itself, if it is Disarmed and a vehicle door is not
opened.
The Rearm countdown is cancelled if a vehicle door is opened.
•Dip switch “On” = Auto-rearm “On”
Dip switch Off = Auto-rearm “Off”
DIP SWITCH # 5:
Siren & Horn
or
Horn Only
:
-
This feature configures the alarm’s Brown/White Horn-Honk output wire.
This wire can be configured to honk the horn in addition to the Brown wire
operating the siren,
or take over all of the Siren’s functions SO THAT NO
SIREN IS NECESSARY.
- If Siren & Horn are selected
: The horn will honk, in addition to siren sounding,
only when the door zone is violated. (The horn will not honk if the alarm is triggered
by the sensor zone, or during confirmation “chirps”)
- If Only Horn is selected:
The car horn will replace the siren and perform all of
its functions.
NOTE:
The Brown Siren wire will still be fully active & operational.
•Dip switch “On” = Siren/Horn
Dip switch Off = Horn Only
DIP SWITCH # 6:
Ignition
Activated Anti-Carjacking:
- This feature turns the alarm’s Ignition Anti-Carjacking feature “On” or “Off”.
Dip switch “On” = Ignition Hijack On
•Dip switch Off = Ignition Hijack Off
DIP SWITCH # 7:
Remote Control
&
Open Door
Activated Anti-Carjacking:
- This feature turns both the alarm’s Remote Control and Open Door activated
Anti-Carjacking features “On” or “Off”.
Dip switch “On” = Hijack On
•Dip switch Off = Hijack Off
