Mounting and Powering the RL100
Mounting Instructions
To help ensure that your RL100 functions properly and
offers maximum protection, please follow these mounting
instructions:
1.
Clean
the area of the windshield where the unit will
be mounted.*
2.
Attach
the supplied
Windshield Mounting Bracket
to
your car’s windshield by firmly pressing the suction cups
in the bracket to the windshield.
a. Mount the bracket as low as possible near
the center of the windshield.
b. Do not mount the unit behind wipers or any
metal obstructions.
3.
Slide
the RL100 unit itself on to the bracket to complete
the mounting.
4.
Level
the radar detector, if necessary, by carefully
bending the Windshield Mounting Bracket.
*IMPORTANT NOTE:
Some windshields include a metallic coating that can
significantly affect reception of radar signals. Consult with your dealer or
check your vehicle’s owner‘s manual to determine if your windshield has
such a coating.
Power Connection
1. Plug the small end of the supplied
Power Cord
into the
Power Input Jack
on the side of the radar detector.
2. Plug the large end of the
Power Cord
into your vehicle’s
cigarette lighter socket or other 12V outlet.
3. Switch on the RL100 by turning the
Power On/Volume
Control Wheel
located on left side of the unit.
No power?
See Troubleshooting Guide on page 16.
4
