Wake-Up Sequence
(using factory default settings)
Once your K40 RD950 has been mounted and had the power
connected, you may begin use immediately by following
these steps:
1.
Switch on the RD950
–
Rotate the Power On / Volume
Control Wheel
on the left side of the unit.
2.
Listen for Wake-Up Sequence
– The RD950 will an-
nounce (voice) and display (screen)
K40 SCAN
then go
through a “wake-up sequence” lasting approximately 5
seconds.
•
You will hear and see all bands report.
3.
You’re ready to drive!
– The RD950 will now display
your Filter setting (Highway, City, or Filter), (page 10).
Want help programming your RD950?
Call 800.323.5608
5
