K40 ELECTRONICS Platinum 100, Owner'S Manual

Page: 7 / 33

Manual Laser Defuser Shut Down During a Police
Laser Encounter
(if equipped)
Press and release button to automatically switch the
Laser Defusers to Receive Only for 30 seconds during a
laser encounter. This gives you the option to control the
duration of jamming signal being transmitted by the Laser
Defusers.
Alerts from Non-Police Signals
Your K40 is sensitive enough to detect signals generated by
non-police sources such as automatic doors, traffic flow
sensors, and radar based safety features. To learn how to
minimize non-police alerts, please read about TRAFFIC
SENSOR FILTER (page 9), FILTER options (page 13), QUIET RIDE
(page 14), and MARK TO MUTE (page 18).
K-Band Filter
Your K40 rejects alerts from most vehicles on the road
equipped with radar-based safety features, such as colli-
sion avoidance. Police radar reception and detection range
are unaffected by this feature.
8
Pulse
Transmit
Receive
Only
Defuser
Settings
Description
Recommended Use
Upon receiving a police laser
signal, the Laser Defuser will
transmit a jamming signal for
up to five seconds, then switch-
es to
Receive Only mode for 30
seconds.
Alert Tones: standard laser alert
tone for five seconds. Drops to
a lower laser alert pitch tone in
Receive Only
mode.
The Laser Defuser will only
detect police laser. No jam-
ming signal will be emitted.
Alert Tone: lower pitch laser
alert tone.
•
Gives you time to reduce
speed. Officer will then be
able to obtain speed to
eliminate the suspicion of
“jamming” where use of
jammers is restricted.
•
Tone notifies you while a
jamming signal is being
transmitted and when
Laser Defuser changes to
Receive Only
.
•
For notification only. Officer
will immediately obtain a
speed reading on your ve-
hicle in this setting.
MUTE