5. The valve on the floor section is position directly under the zipper on the inside / rear of the Kayak.
To access the valve, open the zipper enough to expose the push-in type valve. After inflation, push
the plug flush with the air bladder and close the zipper.
6. Inflate the elevated seat sections, the valves for these chambers are positioned, directly under the
zippers for each elevated seat position (front seat and rear seat).
Make sure all chambers are fully inflated, each chamber should be free of wrinkles and they should feel
firm to the touch.
Adjustable Bucket Seats
The seats can be adjusted to your satisfaction, make adjustments to the length of the straps by using
the buckles at each end of the strap, you may also adjust the position of the seats by moving them
accordingly in the elevated seating areas, the elevated seating areas and the bottom of the seast are
conveniently supplied with Velcro strips to facilitate any adjustments necessary.
Maintenance Cleaning
Clean and check the Kayak as well as all the accessories after each use, rinse the Kayak thoroughly
making sure to remove any residues of salt if use in salt water. Use a mild soapy solution, Do Not use
detergents or any type of silicone-based products. Make sure Kayak is completely dry before put in it
away.
Storage
When storing your Kayak, keep it in a clean and dry place that is not affected from major variations in
temperature and other damaging factors, you may store your Kayak; deflated and rolled up in its bag or
assembled and lightly inflated.
CAUTION
Water will enter between the outer hull and inside chambers, this is OK,
however, whenever you take the K2 Kayak out of the water and
deflate it, allow for it to air out and dry, neither the skin/hull or the inside
chambers will suffer from water damage, but stagnant water could
cause mildew and foul odor.
For long term storage in the sun (especially in tropical regions).
Protect your K2 Kayak with a breathable canvas cover.
Rodents chew on fabric including inflatable Kayak material.
Store it away from rodents. If you choose to store your Kayak inflated,
make sure you do not subject it to deformations.
Repairs on PVC Material
Assess the damage or the area to be repaired, clean the damaged area and the patching material with
a grease remover of the alcohol type, please note that in order for the repair to be successful, the
humidity level should be less than 60%, temperature between 65° F / 77° F or 18°C / 25° C. Avoid
carrying out repairs in the rain or in direct sunlight. Check that the tube is fully deflated and lies flat.
3
