4
Defrosting
5
Cleaning and
Maintenance
Items stored in the freezer and humidity of the surrounding
air might gradually form frost and ice inside the freezer.
A thin layer of the frost or ice will not affect the freezer
performance, but if the frost and ice are getting more
and more, the energy consumption will get higher. Small
amount of loose frost or ice can be removed by a plastic
shovel.
Never use electrical or sharp tools as these
damage the inside chamber or shelves of
the freezer.
When the frost or ice is accumulated too much,
the freezer should be completely defrosted. It is
recommended that defrosting is carried out after all
stored items are moved out of the freezer.
Defrosting process as follows:
1. Power off the freezer, and leave all the freezer doors
open to let the ice melt
2. Use a soft dry cloth to wipe off the water inside of the
freezer
3. Ensure the freezer inside clean and dry before powering
on again.
4. Move items back to the freezer when the set
temperature has been reached.
Chest Freezers Operating Manual
Cleaning
• Before cleaning, cut off the power supply and remove all
the stored items out of the freezer.
• The freezer is best cleaned by a clean, soft, and dry cloth
using mild water, if needed, neutral detergent can be
used to clean the freezer. After cleaning, make sure the
freezer get dried before powering on again. Please be
careful to prevent water entering the control panel.
• The sealing gaskets are recommended to clean regularly
to prevent degradation and extend its life span. The
sealing gaskets shall be cleaned by soft cloth with clean
water.
• If possible, it is also recommended that the tubular
condenser in the refrigeration cabin to be cleaned in a
regular basis to prevent too much dust and dirt affecting
the refrigeration performance.
• The ventilation grill also needs to be away from dust and
dirt, and it is recommended to be cleaned with a vacuum
cleaner in a regular basis.
• If the freezer is not used for a long time, please switch
off, and clean the unit before storage.
Energy Saving
• Keep the inner doors closed as always.
• Make sure the inner doors and outer door closed
properly after opening the freezer.
• Position the freezer in a cooler (min. 5 °C), well-ventilated
room.
• Defrost the freezer at a regular time to prevent ice
accumulating too much.
