K2 Pumps SPP05001K Quick Start Manual Download Page 1

Page: 1 / 2

K2-SPL-1 (Rev. 7/28/21)

Quick Start Guide

Read your manual for installation, operation, and safety information.
This guide neither supplements nor replaces the Owner’s Manual.

Pedestal Sump Pump

3. Ensure Pit/Basin is clear of all debris. Lower the pump into

the center of the sump pit or sump basin. Pit/Basin should
be at least 12” diameter and 18” deep.

4. Plug into a GFCI protected outlet.

5. Check the pump’s operation by filling the sump pit or

basin with water.

NOTE: The Float Switch comes pre-assembled. Refer to your owner’s manual if you need to adjust the ON and OFF position of the float switch.

1. Attach discharge pipe to the pump discharge. Drill a

1/8” anti-airlock hole as shown.

2. Connect a check valve to the discharge pipe.

Be sure the flow is away from the pump.

Discharge Pipe

1/8” Anti-airlock hole

Check Valve

Minimum
18” Deep

Minimum
12” Dia.

GFCI Outlet

Discharge size:
Model SPP05001K: 1-1/2 in. FNPT
or 1-1/4 in. FNPT (with adaptor)
Model SPP03301K: 1-1/4 in. FNPT

Summary of Contents for SPP05001K

Page 1: ...CI protected outlet 5 Check the pump s operation by filling the sump pit or basin with water NOTE The Float Switch comes pre assembled Refer to your owner s manual if you need to adjust the ON and OFF...

Page 2: ...del sumidero 1 Fixez le tuyau d vacuation la sortie de la pompe Percez un trou anti sas de 1 8 tel qu illustr 2 Connectez un clapet anti retour la conduite d vacuation Assurez vous que le d bit est lo...