background image

 

10

Handlebar Ends:

  Make sure the handlebar grips are secure and in good condition. If not, replace them. Make sure 

the handlebar ends and extensions are plugged. If not, plug them before you ride. If the handlebars have bar end 
extensions, make sure they are clamped tight enough so you can’t twist them. If not, tighten them. 

 

WARNING:  Loose or damaged handlebar grips or extensions can cause you to lose control and fall.  

Unplugged handlebars or extensions can cut your body, and can cause serious injury in an otherwise minor 
accident. 

 
D.  The First Ride 

When you buckle on your helmet and go for your first familiarization ride on your new bicycle, be sure to pick a 
controlled environment, away from cars, other cyclists, obstacles or other hazards. Ride to become familiar with the 
controls, features and performance of your new bike. Familiarize yourself with the 

braking action

 of the bike (see 

Section 4.C). Test the brakes at slow speed, putting your weight toward the rear and gently applying the brakes, rear 
brake first. Sudden or excessive application of the front brake could pitch you over the handlebars. Applying brakes 
too hard can lock up a wheel, which could cause you to lose control and fall. If your bicycle has 

toeclips

 or 

clipless 

pedals

, practice getting in and out of the pedals. See paragraph B.4 above. If your bike has 

suspension

, familiarize 

yourself with how the suspension responds to brake application and rider weight shifts. See paragraph B.5 above and 
Section 4.F.  Practice shifting the gears (see Section 4.D). Remember to never move the shifter while pedaling 
backward, nor pedal backwards after having moved the shifter. This could jam the chain and cause serious damage to 
the bicycle.  Check out the handling and response of the bike; and check the comfort.  

If you have any questions, or if you feel anything about the bike is not as it should be, take the bike back to 
your dealer for advice. 

Summary of Contents for Bicycle




















































Reviews: