KTI-63517A
4
3. It should not be necessary to
or top off the reservoir with hydraulic
unless there is an external leak. An external leak
e
familiar with this equipment.
IMPORTANT:
In order to prevent seal damage and jack failur
Use hydraulic jack oil, a light turbine oil, Chevron AW ISO 32 or Unocal Unax AW 150.
4. Every jack owner is responsible for keeping the jack labels clean and readable. Use a mild soap solution to wash external
surfaces
of
the
jack
but not any moving hydraulic components. Contact K-Tool International for a replacement label if your jack's
label is unreadable.
5. Inspect the jack before each use. Do not use the jack if any component is cracked, broken, bent, shows sign of damage or leaks
hydraulic fluid
Do not use the jack if it has loose or missing hardware or components, or is
in any way. Take corrective
action before using the jack again.
6. Do not attempt to make any hydraulic repairs unless you are a
hydraulic repair person that is familiar with this
equipment. Repairs must be performed by an authorized service center.
TROUBLESHOOTING
PROBLEM: UNIT WILL NOT LIFT RATED LOAD.
ACTION:
Purge air from hydraulic system by following procedure under SETUP INSTRUCTIONS.
PROBLEM: UNIT WILL NOT SUSTAIN RATED LOAD OR FEELS "SPONGY" UNDER RATED LOAD.
ACTION:
Purge air from hydraulic system as above.
PROBLEM:
UNIT WILL NOT LIFT TO FULL HEIGHT.
ACTION:
Purge air from hydraulic system as above.
PROBLEM:
HANDLE TENDS TO RAISE UP WHILE THE UNIT IS UNDER RATED LOAD.
ACTION:
Pump the handle rapidly several times to push oil past ball valves in power unit.
PROBLEM:
UNIT STILL DOES NOT OPERATE.
ACTION:
Contact your place of purchase for details on handling warranty.
WARRANTY
K-Tool International warrants that all jacks and service-related equipment will be free from defects in material and workmanship for a
period of 2 years following the original date of purchase. This warranty is extended to the original retail purchaser only. If any jack or
service-related item proves to be defective during this period, it will be replaced or repaired, at K-Tool International’s option, without
charge. This warranty does not apply to damage from accident, overload, misuse or abuse, nor does it apply to any equipment which
has been altered or used with special attachments other than those recommended.
K-Tool
I
nternational HD and XD service-related equipment 2 Year Limited Warranty.
Michigan
