The included documents have been designed to provide helpful hints, further explanation, and solutions to common product issues. If you are
unable to find an answer or a solution within these documents, please feel free to contact K-Tech Customer Service by e-mail at
[email protected] or by telephone at 1-800-993-9399 or (860) 489-9399 for further assistance.
K-Tech International, Inc.
56 Ella Grasso Avenue • P.O. Box 1025
Torrington Connecticut 06790 USA
1-800-993-9399
(860) 489-9399 • Fax: (860) 489-4399
Internet: www.ktechonline.com
Sales: [email protected] • Support: [email protected]
Page 2 of 2
Posted 4/20/2000
Serial numbers 24700 - 200525; 200600 - 207188
1. Verify that a working telephone line is connected to the screw terminals
marked PHONE LINE. Also verify TIP and RING polarity. (see
Tips &
Techniques: Telephone Line Measures
)
2. Determine the number to be dialed. If a “9” is required to access an
outside line, it is reccommended to insert a 3.5 second “Pause” before
entering the rest of the telephone number.
3. Program number as follows:
1. Place MEMORY BACK-UP switch to ON
2. Place PROGRAM/ON-LINE switch to PROGRAM
3. Enter desired number using the integrated keypad
4. Place PROGRAM/ON-LINE switch to ON-LINE
4. Verify that the correct number was stored by pressing the activating
push-button. The phone should automatically dial and complete the call.
Have the called party hang up; the phone should shut off.
Please note: Memory loss could be caused by a low 3 Volt Lithium battery. Verify that the battery reads at least
2.7 VDC. If you have any further questions or problems, please feel free to call for Customer Support.
1
2
3
7
8
9
4
5
6
Ý
0
#
Pause
3V Lithium
Battery (on
back)
Connect
Telephone
Line shield to
true earth
ground using
supplied
Ground Lug
TELEPHONE LINE
On
(Memory
Back-up
Program
On-Line
Auto Answer
On
MICROPHONE
SPEAKER
VOLUME
LED
+
RESET
BUTTON
REMOTE
LED
+TIP
- RING
REMOTE
BUTTON
CHASSIS
GROUND
(phone line)
+
-
Serial numbers 20001 - 24606
1. Verify that a working telephone line is connected to the screw terminals
marked PHONE LINE. Also verify TIP and RING polarity. (see
Tips &
Techniques: Telephone Line Measures
)
2. Determine the dialing type, TONE or PULSE, and set the switch
accordingly. Determine the number to be dialed. If a “9” is required to
access an outside line, it is reccommended to insert a 3.5 second “Pause”
before entering the rest of the telephone number.
3. Program number as follows:
1. Press activating push-button.
As soon as you hear dial tone
,
use the integrated keypad to
enter only the first digit
of the
number to be programmed
2. Wait 5 seconds
3. Enter the rest of the number
4. Programming the phone will place a call to the number entered. Have the
called party hang up; the phone should shut off.
5. Verify that the correct number was stored by pressing the activating push-button. The phone should
automatically dial and complete the call.
Please note: Memory loss could be caused by a low 3 Volt Lithium battery. Verify that the battery reads at least
2.7 VDC. If you have any further questions or problems, please feel free to call for Customer Support.
1
2
3
7
8
9
4
5
6
Ý
0
#
Pause
3V Lithium
Battery
Connect
Telephone
Line shield to
true earth
ground using
supplied
Ground Lug
TELEPHONE LINE
MICROPHONE
SPEAKER
VOLUME
LED
+
BUTTON
PULSE
TONE
- RING + TIP
REMOTE LED
REMOTE BUTTON
(N.O. contacts)
+
-
