EN
6
Exklusiv 02
•
remove the decorative front panel and terminal block cover
• hold the power wire through the cable hole 1 in the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them by tap screw
• fix the wires by means of cable clamp 2
•install the cover of terminal block and front panel by easy pressure
Pic.
2
Exklusiv
02
Pic.8 PRO
Pic.9 PRO
Exklusiv 03
• remove the terminal block cover;
• hold the power wire through the cable hole 1 in the case
• strip the insulation on 5-7 mm from the wire end insert wires into
terminal box X and press them by tap screw;
• fix the wires by means of cable clamp 2;
•install the cover of terminal block.
•Install brackets of holders;
•Install first couple of covers in brackets ;
•Install the fan ;
•Butt airvents from two sides to the fan case
•Fix the fan case with airvents by means of another couple of covers.
Pic.
3
Exklusiv 03
Pic.
4
Exklusiv 03
1
2
cover
of terminal block
fun
duct
connection
duct
connection
cover
cover
bracket
