manualshive.com logo in svg

K-Systems G210 InviCell, User Manual

Share
Download
K-Systems G210 InviCell User Manual Download Page 7

Safety

7

2

Section 2 - Safety

Safety and Reliability

Please read this manual carefully and follow the instructions to ensure that the system will work safely 
and reliably. Safety is the responsibility of the laboratory. Risk assessment and working practices 
should comply with local regulatory policies.

Warnings

WARNING:

 Use only 100% pure CO

2

 and 100% pure N

2

 gas. Use of other gases could 

result in serious injury, depending on the gas connected.

DO NOT 

disassemble or modify any part of the G210 Invicell, or substitute any 

component for any other. Doing so may result in damage to samples. This voids the 
warranty and/or service contract.

WARNING 

To avoid the risk of electric shock, this equipment must only be connected  

to a mains supply with protective earth.

WARNING

 

Not to be used in a patient environment.

WARNING 

Use of accessories, transducers and cables other than those specified 

or provided by the manufacturer of this equipment could result in increased 
electromagnetic emissions or decreased electromagnetic immunity of this equipment 
and result in improper operation. 

Summary of Contents for G210 InviCell

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands