SPRINKLER INSTALLATION
1. INSTALL AND BURY
Thread the sprinkler on the pipe. Bury the sprinkler
flush to grade.
NOTE:
Do not use pipe dope. Gear driven
sprinklers and pop-up sprays should not be installed on
the same watering zone.
2. INSPECTING THE FILTER
Unscrew the top and lift the complete sprinkler assembly
out of the housing can
(S)
. The filter is located on the
bottom of the sprinkler assembly and can be easily
pulled out, cleaned and re-installed.
3. WINTERIZATION TIPS
When using an air compressor to remove water from the
system please note the following:
a.
Do not exceed 30 PSI.
b.
Always introduce air into the system gradually to avoid
air pressure surges. Sudden release of compressed
air into the sprinkler can cause damage.
c.
Each zone should run no longer than 1 minute on air.
Sprinklers turn 10 to 12 time faster on air than on
water. Over spinning rotors on air can cause damage
to the internal components.
K-Rain Manufacturing Corp.
1640 Australian Avenue I Riviera Beach, FL 33404 USA
PH: 561-844-1002 I 1-800-735-7246 I FAX: 561-842-9493
WEB: http://www.krain.com
MINI
PRO
™
GEAR DRIVEN SPRINKLER SETTING INSTRUCTIONS
Continued
© K-RAIN Manufacturing Corp.
Ra
Flow
K
L/M M
3
R
F
GP
L
M
O
N
P
P NOZZLE
KEY NOTCH
Key in Keyhold
Turret
Nozzle
Socket
Lower
Riser
L
M
N
O
13
00
51
05
R
e
v.
1
6
02-18_MiniPro_HP_InstSheet_6 Language Instructions 2/12/18 3:23 PM Page 2
