K-Rain K-DIAL KR5001, User Manual, Page: 4 / 9

6 of 16
Setup
Battery Installation
1. Install 2× 1.5v AAA
alkaline batteries into
your
K Dial Tap Timer
,
as indicated in the battery
compartment [a]
®
After installing the
batteries, the display should
activate as follows if the
main dial is set to
OFF
2. The status of the battery
power is shown by
the battery icon
Á
Do not let the battery
drop below 2 bars
® It is recommended to renew
the batteries each spring,
or at least once per year
Clock
1. To set the system time, turn
the main dial to
CLOCK
®
The minutes will flash
on the display [a]
2. Press plus or minus to adjust the
minutes to the current time
3. Press START
play
to
save minutes
® The hours will now flash [b]
4. Press plus or minus to adjust the
hours to the current time
®
Cycle through 12 hour
periods to change AM/PM
5. Press
START
play to save hours
®
MON will flash [c] to indicate
days can be adjusted
6. Press plus or minus to cycle
through and select
the current
day
7. Press START
play
to
confirm the current day
® The minutes will begin
flashing, this is normal and
the time has been saved
8. Main dial can be turned to
OFF and settings will be saved
Setup
a
a
b
c