Once radio has been connected to the vehicle electric system and to the antenna, the correct operation of the system may be
checked. Please proceed as follows :
1) Check that the power cable is correctly connected.
2) Check that the RF antenna coaxial cable is correctly connected.
3)
Connect the microphone to the connector (21), located on the front side of the radio.
4) Rotate the AS/SQL (19) knob counter clockwise.
5) Turn radio on using the OFF/VOL (20) knob and adjust volume to the desired level.
6) Set the desired frequency, using the CHANNEL selector (13) or the frequency selector keys on the microphone (28 and 30).
7) Rotate the AS/SQL (19) knob clockwise, to cut the background noise.
8) Press the PTT (27) key to transmit and release it to receive.
9) Check the level of the received and transmitted signals on the digital bar S/RF Meter (L) on the LCD display.
The transceiver will work correctly.
Specifications
General
Frequency range
28.000-29.700 MHz HF 10 Meter Band
Operating modes
FM-AM
Frequency control
P.L.L.
Operating temperature
-10°/+55°C
DC input voltage
12.0VDC(minimum) to 32.0VDC(maximum)
Size
153 (L) x 50 (H) x 210 (D) mm
Weight 1.5
kg
Receiver
System
Double conversion, CPU controlled super-eterodine
IF
1° 10.695 MHz / 2° 455 KHz
Sensitivity
0.5uV for 20dB SINAD (FM)
0.5uV for 20dB SINAD (AM)
Audio output
@10% THD 2.5W at 8 ohm
Audio distorsion
<8% at 1 KHz
Image rejection
65dB
Adjacent channel
65dB
Signal/noise ratio
45dB
Current drain
250mA (stand-by)
Transmitter
System
CPU controlled P.L.L. systhesizer
Maximum RF power
20W
Modulation
85% to 90% (AM)
1.8 KHz ±0.2 KHz (FM)
Impedance
50 ohm unbalanced
Current drain
6.0A (at no modulation)
User Information
in accordance with art. 13 of the Legislative Decree of 25th July 2005, no. 15 ”Implementation of Directives 2002/95/EC, 2002/96/EC
and 2003/108/EC, relative to reduction of the use of hazardous substances in electrical and electronic equipment, in addition to
waste disposal”.
The crossed bin symbol shown on the equipment indicates that at the end of its working life the product must be collected
separately from other waste.
The user must therefore take the above equipment to the appropriate differentiated collection centres for electronic and
electro technical waste, or return it to the dealer when purchasing a new appliance of equivalent type, in a ratio of one to
one.
Appropriate differentiated waste collection for subsequent recycling, treatment and environment-friendly disposal of the discarded
equipment helps to prevent possible negative environmental and health effects and encourages recycling of the component
materials of the equipment.
Illegal disposal of the product by the user will be punished by application of the administrative fines provided for by the legislative
decree no. 22/1997 (article 50 and following of the legislative decree no. 22/1997).