JUICING
ALWAYS USE LOW SPEED WHEN JUICING. DO NOT
USE FORCE WHEN JUICING TO AVOID INJURY AND
DAMAGE TO THE APPLIANCE.
AT TAC HM ENT
T I M E /
SPEED
CITRUS JUICER
60sec
LOW
A
Assemble the mixing bowl
f
as described in
ASSEMBLY
OF
THE
MIXING
BOWL
-
PAGE
8,
STEPS
1-4
.
I
Attach the citrus juicer cone
to the citrus
juicer basket
-
see diagrams
I
to
L
on
PAGE
11
.
J
Place the assembled citrus juicer
onto
the blade retainer
!
with the tab rotated
approximately 30° anti-clockwise away from
the mixing bowl
f
handle.
K
Hold the handle of the mixing bowl
f
firmly
with one hand. With the other hand turn the
tab of the citrus juicer
clockwise until it
locks into place. This will activate the safety
interlocks
t
in the mixing bowl
f
handle.
The triangle on the tab of the citrus juicer
should be aligned with the large triangle on
top of the mixing bowl
f
handle.
E
Plug the mains cable into the power socket,
sw itc h the ap p lianc e on and selec t the
appropriate speed setting manually -
DIGITAL
SWITCH
PANEL
-
PAGE
7
.
L
Place half of the citrus fruit on the citrus juicer
cone
and slowly but firmly press down to
extract the juice. Empty the mixing bowl
f
when the liquid reaches the 1000ml mark.
GRATING, SLICING, SHREDDING
BE VERY CAREFUL WHEN HANDLING THE DISCS
. THE BLADES AND PROTRUSIONS ON THE
DISCS’ SURFACES ARE VERY SHARP.
AT TAC HM ENT
FEAT URES
T I M E /
SPEED
FINE / COARSE
SLICING DISC
DOUBLE SIDED
For fine slicing or
grating, the fine slicing
blade or fine grater
should be on
the top side.
For coarse slicing or
grating, turn the disc
upside down so
that coarse slicing blade
or grater are on top.
60sec
MAX
FINE / COARSE
GRATING DISC
SHREDDING DISC
ONE SIDED
Always ensure that the
protrusions are on the
top side of the disc.
A
Assemble the mixing bowl
f
as described in
ASSEMBLY
OF
THE
MIXING
BOWL
,
STEPS
1-4 -
PAGE
8
.
F
Assemble the disc holder
%
by placing one of
the discs on top. Ensure that the correct side of
the disc is always facing up.
G
Mount the assembled disc holder
(
onto the
blade retainer
!
and turn it slightly in both
directions to ensure it is correctly fitted.
D
Fit the mixing bowl cover
d
onto the mixing
bowl
f
as described in
ASSEMBLY
OF
THE
MIXING
BOWL
-
PAGE
8,
STEPS
5-8
.
E
Plug the mains cable into the power socket,
sw itc h the ap p lianc e on and selec t the
appropriate speed setting or automated
program -
DIGITAL
SWITCH
PANEL
-
PAGE
7
.
H
Place the food into the feeder tube and push it
down slowly with the pusher
s
.
F
H
G
D
KMIM 9389 20-08-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED
DIGIMASTER |
DIGITAL FOOD PROCESSOR INSTRUCTION MANUAL
10