The second way as below:
Operate one of earbuds to connect with cellphone, power on the other
earbuds, then the two earbuds will connect with each other automatically.
Please note that the headset which connect with cellphone is Master headset,
the othe is Slave headset.
Remarks:
Pairing mode keeps 2 minutes,the headset will switch to standby mode if
no device can be connected,and they will power off automatically after 3
minutes.
After connected successfully, the two headset (Master/Slave) will
remember each other. The headset will connecting with the latest device
automatically when power on.
The headset can reconnecting with devices automatically if return back
to effective range within 5 minutes.
4.Earbuds pairing/connecting
Please use this step if two headset can not be connect with each
other or you need to change the Master headset.
1.Power on two headset and make it enter pairing mode, red LED and blue
LED flash alternately .
2.Press power button about 2s in one of earbud to enter search mode,red
LED and blue LED slow flash. The headset which connect with cell phone
is Master headset.
3.Two earbuds will pairing and connecting. After two earbuds connecting,
the Master headset will enter pairing mode autiomatically.
Remarks:
In normally the two earbuds will connecting automatically once power
on,which set in factory.
You can connect the two earbuds according above operation if they failed
connecting.
6
