minutes, and automatically turn off after 5 minutes.
4
3.Two earbuds connecting with cellphone
In this mode use two earbuds at the same time to enjoy stereo sound.
1)Turn on the master earbud (BTH108Q-L) and connect it with you
Bluetooth device,then power on the other earbud and it will connect with
each other automatically.
2)master-slave switch: When master earbud is successfully paired with the
phone, the phone will Pop-up a dialog : “Headset would like to pair with
your phone”. If you click “pair”, the slave earbud will also be paired with
the phone.And master-slave switching function can be OK.In the following
cases, the slave earbud can automatically switch and connect to the mobile
phone, so you continue to use:
(1) in the process of use, when the master earbud is automatically turned off
at low power, the slave earbud will be automatically connected to the mobile
phone.
(2) when the master earbud is disconnected from the mobile phone out of
range, the slave earbud will be automatically connected to the mobile phone.
(3) when the master earbud is put into the charging case, the slave earbud
will be automatically connected to the mobile phone.
5
