Care and maintenance
Read the following recommendations carefully before using BTH069.
Following these you will be able to enjoy this product for many years.
Keep it dry and don’t put it in the dump place to avoid the product’s
internal circuit being affected.
Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the
battery or distort certain plastic part.
Don’t expose the product to cold areas. It may damage the internal circuit
board.
Don’t try to disassemble the product as it may get damaged if you are not
professional.
Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.
Don’t use intensive chemical products or detergent to clean the product.
Don’t scratch the surface with sharp things. It may get damaged by
sweat.
In case the product doesn’t function properly, send it to the store you bought
it. The staff will help you to solve the problem
FAQs
1.What does it mean when red LED flashes twice every 20 seconds?
Battery is low power, need to be recharged.
2.Why is the red LED off when charging?
a)
Please make sure the charging device connect with headset well;
b)
The battery may dry up. Please charge the battery for 30 minutes, and
then the red LED will be ON.
3.
How far is the effective rang between the headset and mobile phone?
According to the Bluetooth standard, the max available range of Class II
headset is 10 meters. It varies under different environment.
4. Why can’t I hear the sound on the headset?
a)
Make sure the headset has been switched on;
b)
Make sure the volume is not too low or muted;
c)
Make sure the headset connects with the mobile phone correctly;
d)
Make sure the distance between the headset and the cell phone is in the
available Bluetooth range.
8
