background image

2.

 

Charging for headset 

The headset comes with a built-in rechargeable battery, prior to using it, it is 

recommended to charge the battery fully for the first time. 

When the headset is low power, the headset emits five “Dong” tones every

 

minutes and the red LED flashes instead of blue LED. Please recharge the 

battery of the headset. 

 

The way of charging as following: 

Using USB cable 

1.

 

Plug the special charging clip into the 

charging jack of headset, make it clip the 

headset as pictures shown : 

2.

 

Plug another side of cable to the USB port 

of PC 

Red light on: Charging 
Red light off: Finish charging 

3.

 

It will takes about 2 hours to finfish 
charging 

 
 

Remarks: 
1)

 

The battery is recyclable.   

2)

 

Batteries (battery pack or batteries installed) shall not be exposed to 

excessive heat place, such as sunshine, fire or the like. 

 

 

Getting started 

1.

 

Turning on/off the headset 

Functions 

Operation 

LED indicator 

Turning on 

Press and hold

MFB

button 

about 4 seconds until blue 

LED flashes

Blue LED on one 

second 

Turning off 

Press and hold 

MFB 

button

about 4 seconds until red LED 

flashes

Red LED on one 

second 

Remark: 

In order to save power, the headset will turn off automatically if 

no devices can be connected after 5 minutes. 

 

 

Summary of Contents for BTH023
















Reviews: