2.
Pairing BTC015L with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps
may vary with different models of cell phones. Please refer to your cell
phone’s user’s manual for further information. The general pairing steps are
as follows:
1)
Keep BTC015L and Bluetooth cell phone within 1 meter when pairing;
2)
Enter BTC015L’s pairing mode (please refer to “Turning on/off
BTC015L);
3)
Activate your cell phone’s Bluetooth function and set your cell phone to
search for Bluetooth device within range, and select “BTC015L” from
the list of devices shown;
4)
According to the indication, enter password or PIN No.: “0000”;
5)
If prompted by your cell phone to connect, select “Yes” (This will vary
among cell phone models);
6)
After successful connecting, blue LED
will flash twice every 4 seconds.
Remarks:
If pairing is failed, please turn off BTC015L first and then try re-pairing
according to the step 1-6 mentioned above.
After successful pairing, BTC015L and the Bluetooth cell phone will
remember each other, BTC015L will not need to re-pair with the
Bluetooth cell phone next time unless the pairing information is deleted
because of a new pairing.
Every time BTC015L is turned on, it will connect to last connected
devices automatically. If you want to pair it with other devices, please
turn off the Bluetooth function of current Bluetooth device paired with
BTC015L first and then pair BTC015L with a new device according to
steps 1
～
6 mentioned above.
3.
Installation
You can use BTC015L in your car, at home or in an office environment.
1)
In-car usage
Please insert 3.5m audio out plug into the AUX in jack of car audio system,
and then fix 3.5mm audio dock well. make sure there are no barriers
between user and BTC015L to get the best conversation quality. The
installing steps are as follows:
4
