Remarks:
1. The battery will dry up if you don’t use the handsfree kit for a long time, at
this time, you have to charge the handsfree kit for about 30 minutes, the
LED indicator will be on.
2. Please don’t attempt to take out the battery from the handsfree kit, so as
not to damaging the handsfree kit.
Warning:
1. The battery is recycled.
2. Do not dispose of the battery in fire, as it may cause
explosion.
Using handsfree kit
1.
Switching on/off handsfree kit
Function Operation LED
indicator
Indication
voice
Switch on
Press
button for about 3
～
5 seconds, and release it till
blue light flashes
Blue LED flashes 3
time
Headset
Ready
Swith off
Press
button for about 2
～
3 seconds, and release it till red
light flashes
RED LED flashes 3
time
Powering
Down
Enter into
pairing mode
Make sure the hands free kit is
off, press
button for about
7
～
8 seconds, and release it till
blue LED and red LED flashes
alternately
blue LED and red
LED flashes
alternately
Please pair
Bluetooth
phone now
Remark:
The pairing mode will last 2 minutes, it will switch to standby mode if
exceeding 2 minites. When you have to repair it, please switch off
the handsfree kit firstly, and then make it enter into pairing mode
again.
2.
Pairing the handsfree kit with Bluetooth mobile phone
Please make sure your mobile phone has bluetooth function that is available.
Specific pairing steps may vary with different mobile phones. Please refer to
your mobile phone user manual for further information. The steps are as
follows:
1)
、
Keep the handsfree kit and Bluetooth mobile phone within 1 meter when
