K.M.E. Versio SD 1, User Manual, Page: 10 / 16

10
•
7.2 Volume And Limiter Control
If you would like to change the volume of your system you can
adjust it directly on the VSS 28 by using the System Volume Control
(Level Control). You also have the possibility to activate and use the
Limiter.
The control has two different operating modes/
functions
which can be adjusted under the Menu Item “Mode” (see
7.1). In the first four sound settings only the System Volume Control
can be used while in the following settings only the Limiter Control
can be used. In the Menu Item “Mode” the LED “Limit” indicates
whether the Limiter is enabled or disabled.
S
YSTEM
V
OLUME
C
ONTROL
Is the LED “Limit” not light up, the Volume Control is active
. The
input level of the
audio system can be adjusted from - ∞ to +6 dB. If the adjusting slot is in the
vertical position the input level is adjusted to 0 dB.
L
IMITER
If the LED “Limit” lights up, the Limiter Control is active. You can limit the level of the audio
system from -24 dB to 0 dB. Is the control adjusted to 0 dB the Limiter is disabled. In the
fully clockwise position the control is adjusted to 0 dB. In the User Presets the Limiter
Control is
not
available.
Note:
You can not turn the control by using your hands as the control is recessed in the chassis.
The control can only be adjusted by using a slotted screwdriver or another suitable tool.
•
7.3 User Presets
You have the possibility to create four different User Presets or to change them for your
own purposes. All sound settings, changes of parameters and system adjustments are
editable with the K.M.E. preset editor software (for PC only). It offers a wide range of
recources to design the sound of your audio system. For more details about indicators
and choosing a preset, see 7.1.
Note:
The Menu Item “Mode” is not available in a User
Preset.
S
OFTWARE
A
ND
F
ILE
F
ORMAT
The preset editor software saves the finished preset as a KPX file. These User Preset files
are named “VSS28UP1.kpx”, “VSS28UP2.kpx”, “VSS28UP3.kpx” or ”VSS28UP4.kpx”
and
are NOT to be renamed
.
Please save the files on an
SD Card (FAT32
) and insert it into the VSS 28. Now, the User
Presets can be loaded and used.
Note: The system unit reads the SD Card and recognizes a maximum of 4 User Presets
(as mentioned above) which you can choose. However, only the existing User Presets on
the SD Card are displayed! It is not possible to choose a User Preset in the Menu Item
“Preset” to save on the device if the VSS 28 finds none of the above file names on the SD
Card.
F
IRMWARE
U
PDATE
If you want to update the firmware please read the enclosed User Manual for updates.