K.M.E. SD 8, User Manual, Page: 37 / 44

37
S2*
S2 cnsists of: 2x VB 18 w + 2x VL 12
1. Set-up PA: - place a VB 18 w to the left and right side
in front of the audience (on solid
underground)
- place the top units each on a distance rod on
the VB 18 w
- please fix the top units in a relativ height
for the audience
2. Connection: - plug in the loudspeaker cables (Speakon-
cable) into the lower sockets of each
VB 18 w
- connect the speaker outputs of VB 18 w
(upper sockets) each with a top unit with
loudspeaker cables (Speakon-cable)
- Note! Please turn down all volume controls
on the system amplifier before switching
it on to avoid an undesirable sound
reproduction
S4*
S4 consists of: 2x VB 18 (4 ohm) + 2x VL 12 +
1x DA 428
1. Set-up PA: - place a VB 18 to the left and right side
in front of the audience
(on solid underground)
- place the top units each on a distance
rod on the VB 18
- please fix the top units in a relativ
height for the audience
2. Connection: - plug in two loudspeaker cables
(Speakon-cable, 2-wired) into the
speaker outputs A + B of DA 428 and
connect both subwoofers VB 18
(see left drawing)
- plug in two loudspeaker cables
(Speakon-cable, 2-wired) into the
speaker outputs C + D of DA 428
and connect both top units VL 12
(see left drawing) or
plug in two 4-wired loudspeaker
cables (Speakon-cable) into the
speaker outputs A + B of DA 428
and connect both subs - connect the
top units each with a cross cable
- Note! Please check, that all input
signals are muted before switching
Please choose the preset for S4 on DA 428 on DA 428
(see manual DA 428)!
speaker
input
“right” speaker
input
“left”
speaker
output
“right” speaker
output
“left”
speaker
input
“right” speaker
input
“left”
speaker
input
“right” speaker
input
“left”
A B C D